LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Anti-Lock Brake System) >> Calbrating (adjusting) the steering angle sensor >> Steering angle sensor position >> The steering angle sensor must be calibrated after:

The steering angle sensor must be calibrated after:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. A new steering angle sensor has been installed,
  2. The PSM control device has been exchanged,
  3. The steering gear and / or components which change the zero position of the steering angle sensor have been exchanged,
  4. Accident repairs,
  5. Suspension alignment procedures during which the previous wheel alignment values were changed.

Check the steering angle sensor actual value in the following cases: 

  1. Suspension alignment when no change has been made to the wheel alignment values.
  2. As a check after steering angle sensor calibration.
scientia non olet · About LEMON Manuals