Wheel-alignment corrections
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Rear axle: The kinematic toe-in is not adjustable. Camber and toe can be adjusted via eccentrics.
Front axle: The caster is not adjustable on standard vehicles. In the event of repairs, a caster adjustment facility can be installed if necessary. See INSTALLING CASTER ECCENTRIC . The camber is adjusted by moving the spring strut transversely. For this purpose, loosen the three fastening nuts of the spring-strut mount. After adjusting the toe, the lock nuts on the track rods must be tightened to the prescribed tightening torque of 50 Nm (37 ftlb.).