Important notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Since mainly electronic wheel-alignment analysers in conjunction with printers are used, a specimen alignment card is rarely required nowadays.
So that measured results can be documented in individual cases, however, a copy of the alignment cards shown on the following pages can be used.
The alignment cards can be used for all Boxster vehicles - USA (series / sport), RoW series and RoW sport and Boxster S.
In practice this means the following:
- Alignment cards cannot be ordered for the Boxster and Boxster S.
- Prepare copies of the corresponding alignment card shown.
- Before measurement, enter the general data, vehicle model and the missing nominal values into the copied alignment card. Actual values that are equal for all designs have already been entered. Enter the appropriate version, e.g. USA, RoW series or RoW sport, in the Model column.
- Carry out incoming measurement (actual state) and enter the values in the alignment card.
- After adjustments (if any were necessary), enter the current values in the column Outgoing measurement