Tightening torques for front axle: Steering
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Unlisted values are to be taken from STEERING .
STEERING TIGHTENING TORQUE SPECIFICATIONS
| Location | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|
| Tie rod (ball joint) to steering arm | M12 x 1.5 | 75 (56) |
| Universal joint (steering shaft) to steering gear | M8 | 23 (17) |
| Steering gear to cross member | M10 x 1.5 | 65 (48) |
Replace fit bolt whenever it has been removed.
Replace fastening screws whenever they have been removed.