Tightening torques for front axle: Stabiliser

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

STABILISER TIGHTENING TORQUE SPECIFICATIONS

Location	Thread	Tightening torque [Nm] (ftlb.)
Stabiliser to side member	M10 x 1.5	65 (48)
Stabiliser to stabiliser mount	M10 x 1.5	50 (37)
Stabiliser to spring strut/wheel carrier	M12 x 1.5	85 (63)