Cross member/side member (1 component)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
CROSS MEMBER/SIDE MEMBER TIGHTENING TORQUE SPECIFICATIONS
| Location | Thread | Tightening torque [Nm] (ft lb.) |
|---|---|---|
| Cross member/side member on body (front and rear) | M14 x 1.5 | 160(118) |
| Corner plate on side member | M10 x 1.5 | 65 (48) |
| Corner plate on body | M12 x 1.5 | 100(74) |
| Corner plate on body (with diagonal arm and side member) | M14 x 1.5 | 160 (118) |