Switching off driving stability control*

Press the "TC OFF" logo of the rocker switch.

Driving-stability control cannot be switched off during a TC control process (information light on).

One-sided wheel spin on the drive axle is further prevented by brake control up to a speed of 100 km/h.

Driving stability is not monitored, since the drive wheels can spin at the same rpm (slip).

With driving stability control switched off, the TC warning light in the instrument panel and the indicator light in the rocker switch are lit.

It can be advantageous to switch off driving stability control:

• on a loose surface and in deep snow
• when "rocking" the vehicle free
• when using snow chains.

Switching driving stability control back on* Press the indicator light in the rocker switch.* 

Driving stability control cannot be switched on again during a TC control process (information light on).