LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring - 911 CARRERA (996) >> Repair of main wiring harness >> Removal

Repair of main wiring harness: Removal

  1. Take off cover of battery and radiator tank.
  2. Disconnect the battery and cover terminal or battery.
  3. Remove front wheel housing liner. Undo cable ties in the area of the wheel housing, and remove combination wire.
  4. Carefully remove insulating tape from the combination wire in the area of the disconnection point and cut the old combination wire before the exit to the wheel housing (do not damage any other wires).
scientia non olet · About LEMON Manuals