LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Rear Wheel Suspension, Axle Shaft - 911 CARRERA (996) >> Removing and installing wheel bearing housing (wheel carrier) >> Replacing wheel bearing housings (wheel carriers) >> Distinguishing feature/identification of the stabilizer models

Distinguishing feature/identification of the stabilizer models

  1. Sticker (A) with the spare part number (SP No.).
  2. Production date/calendar week (see text above) in conjunction with the outer diameter, insofar as the SP No. (sticker A) of the stabilizer is no longer legible. The production week (calendar week) is imprinted into one of the two flattened areas where the stabilizer mounts are fitted. Example: 26 9 imprinted. Corresponds to 26th week 1999 (week and year may also stand above each other).
    Fig 1: Identifying Sticker With Spare Part Number
    G03105706Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals