Installing right drive shaft

Install in reverse order. Grease the toothing of the drive shaft with Optimoly HT.
Carry out a visual inspection of all parts. Replace self-locking nuts. Use correct tightening torques.
NOTE:
- When installing the spring strut, make sure that the spring strut fastening screw (arrow) is tightened only in vehicle position. Vehicle position means: Vehicle standing on the wheels, or the wheel suspension is being raised with a universal lift.
Fig 1: Identifying Spring Strut Fastening Screw
Courtesy of PORSCHE OF NORTH AMERICA, INC.

NOTE: Only optimized axle nuts - version B - for drive shaft fastening are available from the Parts Service. These two-part fastening nuts (M22) have a moveable washer (arrows). Retrofitting is possible for all 911 Carrera (996) vehicles and for all Boxsters.

Fig 2: Identifying Drive Shaft Fastening Nuts
Courtesy of PORSCHE OF NORTH AMERICA, INC.