LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Collision >> Body Panels >> Lids, Flaps - 911 CARRERA (996) >> Removing and installing lid release motor, - as of MY 2002 >> Removing lid release motor

Removing lid release motor

  1. Unscrew both fastening nuts and take out the retaining strip.
    Fig 1: Unscrewing Both Fastening Nuts And Taking Out Retaining Strip
    G03103125Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Disconnect the electrical plug connection.
    Fig 2: Disconnecting Electrical Plug Connection
    G03103126Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Unscrew the fastening screws and disengage the cable.
scientia non olet · About LEMON Manuals