Tightening torques for brake hydraulics
TIGHTENING TORQUES FOR BRAKE HYDRAULICS
| Brake master cylinder circuits/ hydraulic unit | N.m (ft. lbs.) | |
| Brake pressure line to brake master cylinder, brake hose, distributor, brake caliper and hydraulic unit | M10 x 1 M12 x 1 |
12 - 14 (9.0 - 10.0) 20 (15) |
| Brake proportioning valve to brake pipe | M10 x 1 | 14 (10.0) |
| Hydraulic unit to holder | M8 | 10 (7.5) |
| Hydraulic unit to body | M6 | 10 (7.5) |
| Brake caliper | ||
| Connecting line to brake caliper | M10 x 1 | 12 (9.0) |
| Bleeder screw to brake caliper | M10 x 1 | 8 - 12 (6.0 - 9.0) |
| Brake pressure line to brake caliper | M10 x 1 | 12 - 14 (9.0 - 10.5) |
| Brake unit | ||
| Brake unit to body | M8 | 23 (17) |
| Brake unit support to body | M8 | 23 (17) |
| Brake master cylinder to brake booster | M14 | 49 (36) |