Modify coding

Follow the instructions of the diagnostic tester.

The Tester displays the current coding as follows:

MODIFY CURRENT CODING

Veh. Ident. No.	xxxxxxxxxxxxxxx
Transmission:	Manual transmission/Tiptronic

TESTER DISPLAY - MODIFY CODING

Work instruction		Tester display
1	Switch on ignition Engine off Select "Modify coding" from the function selection. Follow the instructions of the diagnostic tester.	Veh. Ident. No. Transmission:
2	Select Veh. Ident. No. or transmission and confirm with the Coding (F8) key Ignition off Ignition on (coding is adopted)	Veh. Ident. No. Transmission: