6. TC (OFF) rocker switch with light
For switching driving-stability control on and off.
The rocker switch has one contact for switching off and another for switching on.
To switch off, press the "TC OFF" logo on the rocker switch. This applies a positive voltage to the control module while the switch is operated. This causes driving-stability control to be switched off.
Driving-stability control cannot be switched off during a TC control process (information light on).
When driving-stability control is off, the TC warning light in the instrument panel and the indicator light in the rocker switch are lit.
To switch driving-stability control on, press the indicator light in the rocker switch. This applies a positive voltage to the control module while the switch is operated. This causes driving stability control to be switched on.
Driving-stability control cannot be switched back on during a TC control process (information light on).
Driving-stability control is ready for operation, i.e. is switched on automatically, whenever the engine is started.
System description on