Preparing mounting unit (drive mechanism) for installation

Fig 1: Preparing Mounting Unit (Drive Mechanism) For Installation - Targa

Courtesy of PORSCHE OF NORTH AMERICA, INC.

MOUNTING UNIT (DRIVE MECHANISM) PREPARING PROCEDURE - TARGA

No.	Procedure	Instructions
1	Assembling front mount	Note: -arrow-11-8A-8-11-10A-8-direction of the arrow-8- . See Fig 1. The enlarged collar -arrow-11-8A-8-11-10A-8-direction of the arrow-8- . See Fig 1.
2	Assembling rear mount	Position the rear input shaft connection -10B-9-direction of the arrow-9-10C-12-direction of the arrow-12-10B, 10-C- . See Fig 1.