LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats - 911 CARRERA (996) >> Removing and installing front seat - as of MY 1996 >> Removing front seat

Removing front seat

Fig 1: Removing Front Seat (As Of MY 1996)
G03106096Courtesy of PORSCHE OF NORTH AMERICA, INC.
FRONT SEAT REMOVING PROCEDURE (AS OF MY 1996)

No. Procedure Instructions
1 Removing seat rail cover -2A-  . See Fig 1 . Unscrew the sheetmetal screws out of the seat rail cover at the front -2A-2A-  . See Fig 1 .
2 Removing seat rail cover -2B-  . See Fig 1 . Insert a screwdriver under the locking tabs and press lightly upwards. -2B-  . See Fig 1 .
CAUTION: -2B-  . See Fig 1 .

Locking tabs can break. -2-B-  . See Fig 1 .

Pull front seat rail cover -2B-  . See Fig 1 .

3 Undoing seat screws at front Move seat to its rear limit position and undo the front M10 x 28 Torx screws -3-  . See Fig 1 .
4 Undoing seat screws at rear Move seat to its front limit position and undo the M10 x 28 Torx screws -3-  . See Fig 1 .
5 Disconnecting the electrical plug connection Release plug connector locking device on the side -arrow---  . See Fig 1 .