Central plug
- -A-
Coding pin: In the Boxster in opening 2, in the 911 Carrera and 911 Turbo in opening 5. Pin BR opening 6, pin RE/VI opening 3. See Fig 1
.
- -B-
Slide in lock-in position. See Fig 1
.
- Removing coding pin and pin. See REMOVING AND INSTALLING FRONT SEAT, - AS OF MY 1996
.
- Pull slide -B-
in -direction of arrow 1-
. See Fig 1
.
- Lever out fuse -arrow 2-
with a small screwdriver and remove completely. See Fig 1
.
- Pull out coding pin -A-
with pliers. Press pin out of flat connector using press-out tool. See Fig 1
. See TOOLS
.
- Installing coding pin and pin
- Insert coding pin -A-
and pin into the flat connector until it engages. See Fig 1
.
- Insert fuse -2-
in -direction of arrow-
until it engages. See Fig 1
.
- For seat installation: Insert counter plug into vehicle and push in slide -B-
. See Fig 1
.
Courtesy of PORSCHE OF NORTH AMERICA, INC.