Standardising the system

Standardising the power windows 

The system must be re-standardised after an interruption in the power supply to the power window electronics in the door. The position values for the short-stroke lowering function, position-controlled lowering function in the case of convertible top actuation and enabling for "automatic start-up of window closing" (one-touch function) are redefined. The standardisation process is initiated by continuous actuation of the operating button Raise window).

• Hold down the button Raise window] until the window is closed and is switched off by the blockage detection function of the power windows.

Blockage detection function 

Precondition for operation of the power windows 

• Ignition switched on.
• Ignition key should not be removed from the steering lock with the ignition switched off.
• The door is opened for the first time after switching off the ignition.
• Door opened.