Work preparation
The following information is required to teach the hand-held transmitter:
- Key learning code from IPAS.
- 24-digit Code No. (see barcode label on key grip).
- If the key is stolen or the hand-held transmitter is faulty, all keys still in the customer's possession will be required.
NOTE:
- During maintenance work, please bear in mind that the transmission frequency of the hand-held transmitter is different depending on the country of use. The corresponding reception frequency is printed on the alarm system control module. This reception frequency is either:
- 433 MHz with M-number M534
- 315 MHz with M-number M535; refer to the ALLOCATION TABLE FOR COUNTRY CODING