LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Instruments, Fuel Gauge, Alarm System - (Removal & Installation) 911 CARRERA (996) >> Removing and installing horn >> Installation

Removing and installing horn: Installation

  1. Observe installation position of the horns. The horn must not touch the body or a bracket.
  2. A toothed washer must be fitted between the horn and bracket. Tightening torque of the M6 hexagon nut = 10 Nm (7.5 ftlb.)
scientia non olet · About LEMON Manuals