Assemble instrument cluster

Carefully assemble display unit and front frame. Engage clips (new version).
Before installing the electronic unit, check that the two green guide rails are pushed outwards.
Assemble the electronic unit and display unit carefully and evenly (do not tilt). Engage the clip in the centre at the bottom. Close the locking tab on the upper part of the electronic unit in the top of the front frame bracket.
Using a screwdriver, push the two green guide rails inwards over the contact connector (take care that they are not crooked).
Push the right and left sheetmetal springs over the fixing lugs.
Push on the adjustment button of the clock and trip mileage counter.