Vehicle hand-over
NOTE:
This information applies to instrument cluster system K22, K23, K27, K30.
The instrument cluster is converted into delivery mode (low-current mode) in production. As known from other systems (alarm system, PCM, roll-over bar), the instrument cluster must be activated with the Porsche System Tester II 9588.
- Connect the Porsche System Tester II 9588 and switch on the ignition.
- elect the menu item Special functions and press the "FORWORD" key.
- Select the menu item Vehicle hand-over and press the "FORWORD" key.
- Follow the instructions of the Porsche System Tester II 9588.