Fault code 9115: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING FAULT CODE 9115
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out air-conditioning system fault memory |
- Check whether the air-conditioning control module is still functional. Check voltage supply and fuse of the air-conditioning system control module
- Read out air-conditioning fault memory and remedy any stored faults
|
The fault is remedied
->End |
Step 2 |
| 2 |
Check CAN Comfort high for open circuit |
- Switch off ignition
- Remove plug A from the instrument cluster
- Pull plug off the air-conditioning control module
- Pull plug off the PCM 2
- Measure resistance between plug A on the instrument cluster pin 14 and plug B on control module of air-conditioning system pin 1
|
< 5
Step 3 |
Repair wiring harness
->End |
| 3 |
Check CAN Comfort low for open circuit |
- Measure resistance between plug A on the instrument cluster pin 30 and plug B on control module of air-conditioning system pin 2
|
< 5
Step 4 |
Repair wiring harness
->End |
| 4 |
- Replace the control module of the air-conditioning system.
|
->End |