Possible cause of fault
- Short circuit between the two CAN leads (CAN-high and CAN-low)
- Short circuit between CAN-high (Comfort) and ground
- Short circuit between CAN-low (Comfort) and voltage
- A faulty control module connected to CAN comfort bus
NOTE:
- The CAN Comfort bus is connected to the following control modules:
- Air conditioning
- Instrument cluster
- PCM 2 as of model year 2003
NOTE:
During troubleshooting, the plugs on the instrument cluster are re-attached in Step 4 while the plugs on the air-conditioning system control module remain removed. Due to the system, fault code "9115 air-conditioning control module" is additionally entered in the fault memory of the instrument cluster.