LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Linings, Insulation - 911 CARRERA (996) >> Removing and installing A-pillar trim - Cabriolet >> Tightening torques

Tightening torques

A-PILLAR TRIM TIGHTENING TORQUES SPECIFICATION (CABRIOLET)

Location Illustration Thread Tightening torque [Nm] (ftlb.)
Fastening screw for convertible-top peg housing to cowl panel frame -1-  . See Figure . M6 10 (7.5)