Installing side window

Fig 1: Installing Side Window Components

G03055799

Courtesy of PORSCHE OF NORTH AMERICA, INC.

NOTE:

The removed side window can be reinstalled if:
there is no prior damage to the side window.
the side window was removed without being damaged.

SIDE WINDOW COMPONENTS INSTALLING PROCEDURE

No.	Procedure	Instructions
1	Fitting the rubber seal	Fit the rubber seal -5- . See Fig 1 .
2	Remove side window.	Affix suction cups to the side window. Insert side window -4-direction of arrow- . See Fig 1 . 1 Keep pressing the side window -4- upwards in -direction of arrow B- and insert at the bottom. See Fig 1 . 2 Pull the lip of the seal forward under the side window -4- using a plastic spatula. See Fig 1 . 3 Keep pressing the side window -4- upwards in -direction of arrow B- and insert the spacer in the retaining rail. See Fig 1 .
3	Adjusting gap dimension	See Test and adjusting values .
4	Unscrew fastening nuts and screws.	Screw down the fastening screw -1-2-3- . See Fig 1 .
	Install B and C pillars	Refer to REMOVING AND INSTALLING TRIM OF A, B AND C-PILLARS, - AS OF MY 1997 .