LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Heated Glass/Defoggers >> Glasses, Window Control - 911 CARRERA (996) >> Removing and installing power window motor >> Standardizing the new power window motor

Standardizing the new power window motor

  1. Switch on ignition.
  2. Open door window completely by continuously actuating the power window operating button, and then close window. Press power window button until the window is closed and is switched off by the blockage detection function of the power window motor. Standardisation is then completed.
  3. Perform a function test.
scientia non olet · About LEMON Manuals