LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Heated Glass/Defoggers >> Glasses, Window Control - 911 CARRERA (996) >> Removing and installing power window motor >> Installing power window motor

Installing power window motor

  1. Guide power window motor through the loudspeaker cut-out and insert in the toothing. Tighten fastening pins of power window motor.
  2. Engage electrical plug connection.
  3. Push power window unit onto fastening pins.
  4. Tighten the three fastening nuts on the power window motor.
  5. Carefully glue the moulded foam part onto the inside of the door (protects against water leaking in).
  6. Install loudspeaker unit and door panel.
  7. Connect the battery.
scientia non olet · About LEMON Manuals