LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lights, Lamps, Switches Diagnosis - 911 CARRERA (996) >> System LWR 01 >> Calibration >> Procedure:

System LWR 01: Calibration: Procedure:

  1. Connect PST2 and switch on the ignition
  2. Select vehicle type 911 (996)  and start the automatic control module search.
  3. Select control module HBA  .
  4. Select menu item Calibration  and follow the instructions displayed by the PST2.
    NOTE: The servomotors will be activated in the three possible positions - max. position, centre position and min. position - during calibration. Observe this process with the dipped beam switched on. Read out the fault memory after calibration.