Removing and installing drive motor for headlight beam adjustment: Removal

Remove the headlight and open the rear cover. Disconnect the electrical plug connection on the drive motor.
Undo the fastening screw and remove the drive motor by turning counter-clockwise (bayonet lock).

Fig 1: Undoing Fastening Screw & Removing Drive Motor For Headlight Beam Adjustment
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Swivel the drive motor up, press down the locking tab (arrow) with a small screwdriver and carefully pull out the drive motor (plastic housing).

Fig 2: Removing Drive Motor For Headlight Beam Adjustment Plastic Housing
Courtesy of PORSCHE OF NORTH AMERICA, INC.