Removing control module for gas discharge lamp
- Switch off light.
- Remove main headlight. See
REMOVING MAIN HEADLIGHT
.
- Unscrew fastening screws -arrow-
from the control module holder and remove holder.
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- Raise the catch of the electrical plug connection (grey plug) with a screwdriver and disconnect.
- Unscrew both fastening screws -A-
, press both locking tabs -B-
and remove the rear cap -1-
.
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- Unscrew electrical plug connection -B-
on the gas discharge lamp (bayonet lock).
Courtesy of PORSCHE OF NORTH AMERICA, INC.
- Unclip the wiring arrangement -A-
from the closure cap and remove the control module with the closure cap wire. See Fig 3
.