Ring break diagnosis (when the engine is running)

RING BREAK DIAGNOSIS (WHEN ENGINE RUNNING)

Menu item	Function
Ring break diagnosis (when the engine is running)	A ring break diagnosis (when the engine is running) can be carried out using this menu item. Connect and start the Porsche System Tester II 9588 and switch on the ignition Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key. Select PCM2 in the Control units menu and confirm with the "FORWORD" key Select PCM2 GW in the PCM2 function selection and confirm with the "FORWORD" key. Select MOST components check in the PCM2-GW function selection and confirm with the "FORWORD" key. Select Ring break diagnosis (when the engine is running) in the 911 (996) PCM2-GW MOST components check function selection and confirm with the "FORWORD" key.

Menu item

Function

A ring break diagnosis (when the engine is running) can be carried out using this menu item.

Connect and start the Porsche System Tester II 9588 and switch on the ignition
Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
Select PCM2 in the Control units menu and confirm with the "FORWORD" key
Select PCM2 GW in the PCM2 function selection and confirm with the "FORWORD" key.
Select MOST components check in the PCM2-GW function selection and confirm with the "FORWORD" key.
Select Ring break diagnosis (when the engine is running) in the 911 (996) PCM2-GW MOST components check function selection and confirm with the "FORWORD" key.