|
|
This menu item makes it possible to assess the quality of the data transmission. This is a counter which increases the value when faults appear within a certain time period. The check is carried out continuously at predetermined intervals.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM2 in the Control units menu and confirm with the "FORWORD" key
- Select MOST components check in the PCM2 function selection and confirm with the "FORWORD" key.
- Select Data transmission check
in the 911 (996) PCM2 MOST components check function selection and confirm with the "FORWORD" key.
|