Telephone/telematics control module function: Identification
The diagnosis software number and the part numbers for the PCM2 can be read out under this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control units menu and confirm with the "FORWORD" key
- Select Telephone/telematics in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Identification in the 911 (996) telephone/telematics function selection and confirm with the "FORWORD" key.
- Diagnosis software number; PCM2 part number. appears on the display
NOTE:
Deactivate the automatic traffic announcement before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.