Optical performance check
OPTICAL PERFORMANCE CHECK
| Menu item |
Function |
- Optical performance check
|
The optical performance check allows the performance of the MOST to be checked optically. The following checks are carried out automatically:
- MOST installed components list (required and actual installed components list) is analysed.
- External MOST components display.
- Carrying out the performance check.
- The result is displayed by the tester.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select Cayenne in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM2 in the Control modules menu and confirm with the "FORWORD" key.
- Select MOST components check in the PCM2 function selection and confirm with the "FORWORD" key.
- Select Optical performance check
in the Cayenne PCM2 MOST components check function selection and confirm with the "FORWORD" key.
- Follow the Tester instructions.
|