Extended identification: Notes

Additional data present in the control module can be read out using this menu item.

1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 (996) in the Vehicle type menu and confirm with the key.
3. Select PCM in the Control modules menu and confirm with the "FORWORD" key.
4. Select PCM2 MMI in the PCM2 function selection and confirm with the "FORWORD" key.
5. Select Identification  in the PCM2 MMI function selection and confirm with the "FORWORD" key.
6. Diagnosis software number; PCM2 parts number  appears on the display.
7. In the PCM2 - MMI identification function selection the extended identification can be read out using the "F8" key or the "FORWORD" key.