LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2003 >> 911 Carrera 4S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996) >> PCM2 MMI control module function >> Coding

PCM2 MMI control module function: Coding

The PCM2 can be coded country-specifically under the menu item Modify coding.

PCM2 CODING PROCEDURE

Menu item Function
  • Call automatically accepted:
 Using this menu item, the PCM2 can be coded so that an incoming call can be automatically accepted.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Call automatically accepted  in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select Call automatically accepted  from the menu item displayed and code it with the "F8" key.
  • Display format
 Using this menu item, you can code the display format.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Display format in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Use the arrow keys to select as required and code with the "F8" key.
  • Date
 Using this menu item, you can code the date.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Date in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Use the arrow keys to select as required and code with the "F8" key.
  • Units
 Using this menu item, you can code the relevant units.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Units  in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select the relevant units  from the menu item that is displayed and code them with the "F8" key.
  • Vehicle type vehicle coding
 Under this menu item, the PCM2 MMI corresponding to the vehicle type can be coded.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Vehicle type vehicle coding in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select 911 (996)  in the menu and code with the "F8" key.
  • Vehicle version vehicle coding
 Under this menu item, the PCM2 MMI corresponding to the vehicle version can be coded.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Vehicle version  in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select the relevant version Coupe, Cabrio, Targa  in the menu and code with the "F8" key.
  • Right/left-hand drive vehicle coding
 Under this menu item, the PCM2 MMI corresponding to the vehicle version can be coded.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Right/left-hand drive vehicle coding  in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select Right/left-hand drive vehicle coding in the Modify PCM2 coding menu and confirm with the "FORWORD" key.
  • Select Right or left-hand drive  in the menu corresponding to the vehicle equipment and code with the "F8" key.
  • GAL (noise-dependent loudspeaker boost - NLB)
 Using this menu item, you can code the NLB as required.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select NLB in the PCM2 coding function selection and confirm with the "FORWORD" key.
  • Select Value corresponding to the desired volume and code with the "F8" key.
  • Country coding
 Using this menu item, you can code the country code.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Country coding in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select the relevant country coding from the menu displayed and code it with the "F8" key.
  • Main set-up menu
  • PCM2 code
 You can use this menu item to code the PCM2 code after replacing the PCM2 GW.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select PCM2 code in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Take the PCM2 code from IPAS, enter it using the arrow keys and code it with the "F8" key.
  • Porsche Assistance, international designation
 Using this menu item, you can code the Porsche Assistance, international designation as appropriate.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Porsche Assistance, international designation in the 911 (996) PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • In the Modify PCM2 MMI coding function selection, use the direction arrows to input data and code with the "F8" key.
  • Porsche Assistance, international number
 Using this menu item, you can code the Porsche Assistance, international designation as appropriate.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Porsche Assistance, international number in the 911 (996) PCM2 MMI coding and confirm with the "FORWORD" key.
  • In the Modify PCM2 MMI coding function selection, use the direction arrows to input data and code with the "F8" key.
  • Porsche Assistance, national designation
 Using this menu item, you can code the Porsche Assistance, designation as appropriate.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the key.
  • Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Porsche Assistance, national designation  in the 911 (996) PCM2 MMI coding and confirm with the "FORWORD" key.
  • In the Modify PCM2 MMI coding function selection, use the direction arrows to input data and code with the "F8" key.
  • Porsche Assistance, national number
 Using this menu item, you can code the Porsche Assistance, national number as appropriate.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Porsche Assistance, national number in the 911 (996) PCM2 MMI coding and confirm with the "FORWORD" key.
  • In the Modify PCM2 MMI coding function selection, use the direction arrows to input data and code with the "F8" key.
  • Summer/winter time
 Using this menu item, you can code the summer/winter time.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Summer/winter time in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Code the selection required with the "F8" key.
  • Time-out
  • Traffic broadcast loudspeaker boost
 You can use this menu item to code the traffic broadcast loudspeaker boost in the PCM2.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Traffic broadcast loudspeaker boost in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Code the selection required with the "F8" key.
  • Time
 Using this menu item, you can code the current time.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Time in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Use the arrow keys to select the required Time and code with the "F8" key.
  • Time zone
 Using this menu item, you can code the required time zone.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 MMI function selection and confirm with the "FORWORD" key.
  • Select Time zone in the PCM2 MMI coding function selection and confirm with the "FORWORD" key.
  • Select the required Time zone and code with the "F8" key.
scientia non olet · About LEMON Manuals