Coding country-specific tuner settings
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding in the 911 (996) PCM2 GW function selection and confirm with the "FORWORD" key.
- Select Tuner parameters in the PCM2 GW coding function selection and confirm with the "FORWORD" key.
- Take the country-specific code as it appears in the table, enter it in the form and code with the "F8" key.