Control module function - external BOSE amplifier: Coding
Under the menu item Modify coding, the PCM2 codes can be coded on a vehicle and country-specific basis.
PCM2 CODING - VEHICLE AND COUNTRY
| Menu item |
Function |
- Vehicle type vehicle coding
|
The external BOSE amplifier corresponding to the vehicle type can be coded using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier
in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding
in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select 911 (996)
in the menu and code with the F8 key.
|
- Vehicle version vehicle coding
|
Under this menu item, the external BOSE amplifier corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control module menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Vehicle version vehicle coding in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select the relevant version Coupe, Cabrio, Targa in the menu and code with the F8 key.
|
- Right/left-hand drive vehicle coding
|
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select Right/left-hand drive vehicle coding
in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select Right or left-hand drive
in the menu corresponding to the vehicle equipment and code with the F8 key.
|