Vehicle hand-over
NOTE:
The CDR23 is converted into production mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, amplifier, roll-over bar), the CDR23 must be activated with the Porsche System Tester II 9588.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select Special functions in the Vehicle type menu and confirm with the "FORWORD" key.
- Select Vehicle hand-over in the Control modules menu and confirm with the "FORWORD" key.
- Follow the instructions of the Porsche System Tester II 9588.