Diagnosis/troubleshooting on the PCM2 navigation module
DIAGNOSIS/TROUBLESHOOTING (8002 NAVIGATION)
| Work instruction |
Display OK |
If not OK |
| 1 |
Read out Navigation fault memory |
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control units menu and confirm with the "FORWORD" key.
- Select Navigation in the PCM2 function selection and confirm with the "FORWORD" key.
- Select Fault memory in the Navigation function selection and confirm with the "FORWORD" key.
- Read out fault memory.
- Erase fault memory.
- Remove ignition key and switch on ignition again.
- Read out fault memory.
|
-> End |
Fault code is displayed
Step 2 |
| 2 |
Replace PCM2 navigation module |
-> End |