Possible cause of fault
- Audio CD damaged or inserted incorrectly (label up)
- No audio CD inserted (data CD)
- Audio CD dirty, scratched or damp
- Insufficient power supply
- Glass fuse in CD changer faulty
- Wake-up/diagnosis lead (open circuit, short circuit, short to B+, short to ground)
- MOST switch closed.
- External amplifier (if installed) - no power supply
- Telephone/telematics (if installed) - no power supply
NOTE:
- The MOST optical waveguide is connected to the following control modules:
- PCM2
- CD changer
- Amplifier
- Telephone/telematics