| 1 |
Read out PCM2 fault memory |
- Connect the Porsche System Tester II 9588 to the diagnostic socket, start it and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control units menu and confirm with the "FORWORD" key.
- Select PCM2 MMI in the PCM2 function selection and confirm with the "FORWORD" key.
- Select Fault memory in the menu and confirm with the "FORWORD" key.
- Read out fault memory.
- Erase fault memory.
- Remove ignition key and switch on ignition again.
- Read out fault memory.
- Extract ambient data, press the "FORWORD" key.
|
The fault is remedied -> End |
Step 2 |