LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> Boxster Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instruments, Fuel Gauge, Alarm System - Diagnosis >> System I 16 >> Fault overview >> Notes

Fault overview: Notes

FAULT OVERVIEW - SYSTEM I 16

Test point Fault code Fault effect
Test point 1  01 -
Test point 2  02 -
Test point 3  03 -
Test point 4  04 Central locking not possible
Test point 5  05 Central unlocking not possible
Test point 6  06 Central locking or unlocking not possible
Test point 7  07 Same as for test point 4
Test point 8  08 Same as for test point 5
Test point 9  09 Same as for test point 6
Test point 10  10 Alarm system/central locking No function
Test point 11  11 Interruption of alarm output
Test point 12  12 -
Test point 13  13 -
Test point 14  14 -
Test point 15  15 No function
Test point 16  16 Doors not unlocked in case of accident
Test point 17  17 Same as for Test point 16 
Test point 18  18 Power window control does not function
Test point 19  19 Engine cannot be started
Test point 20  20 Same as for test point 19
Test point 21  21 Same as for test point 19
Test point 22  22 No passenger compartment monitoring
Test point 23  23 -
Test point 24  24 Engine cannot be started
Test point 25  25 -
Test point 26  26 -
Test point 27  27 -
Test point 28  28 -
Test point 29  29 -
Test point 30  30 -
Test point 31  31 Engine cannot be started
Test point 32  32 No passenger compartment monitoring
Test point 33  33 Same as for Test point 32 
Test point 34  34 Same as for test point 32
Test point 35  35 Same as for Test point 32 
Test point 36  36 Same as for Test point 32 
Test point 37  37 Same as for Test point 32 
Test point 38  39 Engine cannot be started
Test point 39  40 Same as for Test point 38 
Test point 40  41 Same as for Test point 38 
Test point 41  42 Same as for Test point 38 
Test point 42  43 -
Test point 43  44 -
Test point 44  45 Central locking or unlocking not possible
NOTE: The frequency counter is set to 1 the first time a fault occurs. At every changeover from not present to present, the counter is increased by 1.
NOTE: After a fault occurs at the alarm system and is remedied, the fault memory must be cleared.