Fault code 9123: Diagnosis/troubleshooting
DIAGNOSIS/TROUBLESHOOTING - FAULT CODE 9123
| Work instruction | Display OK | If not OK | ||
|---|---|---|---|---|
| 1 | Check wiring between oil level indicator sensor and instrument cluster for short to B+ |
|
0 V Step 2 |
Repair wiring harness -> End |
| 2 | Check wire between oil level indicator and instrument cluster for short to ground |
Measure resistance between pin 18 of plug B on instrument and ground |
Step 3 | Repair wiring harness -> End |
| 3 | Check wiring between oil level indicator sensor and instrument cluster for open circuit |
|
< 5 Step 4 |
Repair wiring harness. -> End |
| 4 | Check oil level indicator sensor |
|
5 up to 10 at 20 °C. Step 6 | Step 5 |
| 5 |
|
-> End | Step 6 | |
| 6 |
|
-> End | ||