LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Front Wheel Suspension, Drive Shafts - 911 CARRERA (996)) >> Removing and installing front drive shaft >> Tools

Removing and installing front drive shaft: Tools

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Special Tools Used For Front Drive Shaft
G03105664Courtesy of PORSCHE OF NORTH AMERICA, INC.
SPECIAL TOOLS DESCRIPTION

Item Special tool designation Remarks
A Torx screwdriver 9546 To counter the ball joints (track rod and joint mount) during assembly and disassembly.
B Ball joint extractor (track rod extractor), commercially available  
C Press-out tool (ball joint extractor) 9560 To press out the ball joint on the wheel carrier.
scientia non olet · About LEMON Manuals