LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust Gas Turbocharging - 911 Turbo (996) >> Checking and adjusting the bypass flap control boxes on the turbocharger >> Check and adjust (cylinder bank 4 - 6)

Check and adjust (cylinder bank 4 - 6)

  1. Fasten special tool dial gauge holder VW 387 onto the underneath of the right camshaft housing.
    Fig 1: Fastening Special Tool Dial Gauge Holder VW 387 Onto Underneath Of Right Camshaft Housing
    G03093520Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Make tracer pin (shop-made). The tracer pin must be bent accordingly in the area of the deflector plate.
  3. Carry out checking and adjusting, using the same method used on cylinder bank 1-3.
scientia non olet · About LEMON Manuals