LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring - 911 Turbo (996) >> Removing and installing fusible element in the current distributor >> Removing fusible element from the current distributor

Removing fusible element from the current distributor

  1. Remove cover for current distributor and remove the service label.
  2. Carefully lever off the cover -A-  with a screwdriver -arrow-  . This will break the locking tabs and the cover can be removed.
    Fig 2: Removing Cover For Current Distributor
    G03091760Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Remove the broken locking tabs from the current distributor.
    Fig 3: Removing Broken Locking Tabs From Current Distributor
    G03091761Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Unscrew the two hexagon nuts M 5 -3- from the blown fusible element -1- and remove with the washers -2-.
scientia non olet · About LEMON Manuals