LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring - 911 Turbo (996) >> Measurement of closed-circuit current >> Preparations on the vehicle >> Connecting measuring device

Connecting measuring device

  1. Set the measuring device to the highest possible current measuring device.
  2. With two alligator clips, connect the measuring instrument to the battery ground and to the second body ground which is always available for RHD or LHD versions.
  3. Remove ground strap from the body and secure against contact with the body. The on-board current now flows via the ammeter.
scientia non olet · About LEMON Manuals