LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 Turbo, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Starter, Power Supply - 911 Turbo (996) >> Removing and installing three-phase generator >> Installing the three-phase generator

Installing the three-phase generator

  1. Fasten B+ lead and install three-phase generator.
  2. The B+ lead must be fastened onto the long wiring arrangement -(arrow)-  of the three-phase generator (see Fig 1 ).
    Fig 1: Installing B+ Lead Onto Three-Phase Generator
    G03093686Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Install deflection roller and fit drive belt.

    Tightening torque of the hexagon nut M16 x 1.5: 65+/- 5 Nm (48 +/- 3.5 ftlb) 

    Tightening torque of the hexagon-head bolts M10: 46 Nm (34 ftlb.) 

    Tightening torque of the M8 hexagon nut: 15 Nm (11 ftlb.) 

    Tightening torque of the deflection roller M10: 46 Nm (34 ftlb.) 

  4. Install air flow sensor with air cleaner assembly and connect battery.
  5. Perform a function test.
scientia non olet · About LEMON Manuals